Symptoms and their usual causes

Lock faults rarely come out of nowhere. Matching the symptom to a likely cause helps decide whether a repair is worthwhile. These are the problems we are most often asked about:

Symptom	Common causes	Good to know
Key stiff or hard to turn	Wear, dirt, a worn key, or pressure from a misaligned door	Stop before the key snaps. Check if it turns more easily with the door open.
Handle will not lift / lock will not engage	Multipoint keeps out of line, dropped door, worn gearbox	Do not force it – that can break the gearbox.
Door must be slammed to latch	Latch and strike plate no longer line up	Often an adjustment rather than a new lock.
Handle loose or floppy	Loose fixings, worn spindle or broken spring	Can damage the mechanism if left.
Key turns but nothing happens	Broken cam, cylinder or internal component	May need a replacement part.

Lock Repair in East Moulsecoomb

If your lock stops working, avoid forcing it before the cause is understood. We ask about the door and key operation so the available entry or repair approaches can be assessed.

What affects locks in East Moulsecoomb

uPVC and composite doors. Hinges can settle and doors can drop slightly over time, putting load on the multipoint mechanism. Adjusting the door or keeps can take that strain off before the gearbox fails.

Repair or replace?

Repair or adjust when the lock itself is sound and the fault comes from alignment, loose fixings or a single worn component that can be replaced.
Replace when the mechanism is badly worn or damaged, parts are no longer available, or repeated repairs have not lasted.
Upgrade at the same time only if it makes sense – for example if a cylinder needs replacing anyway and a more secure one costs little extra.

We explain which category your lock falls into, and why, before any chargeable work.

What to avoid while you wait

Forcing the key or handle – this is the most common way a minor fault becomes a broken gearbox or snapped key.
Spraying heavy oil or grease into the cylinder, which can collect dirt. If you use anything, a lock-specific lubricant is better.
Leaving a door that will not lock properly unsecured overnight. If that is the situation, treat it as urgent – see our emergency locksmith page for East Moulsecoomb.

About our lock repair service in East Moulsecoomb

East Moulsecoomb is within the city of Brighton & Hove, in our core service area. We are a service-area business and do not have an office or premises in East Moulsecoomb; we travel to customers from the Brighton area.

Nearby, we also take enquiries from Moulsecoomb, North Moulsecoomb and Bevendean. For an overview of everything we do here, see locksmith services in East Moulsecoomb.

Lock repair costs

Minor lock adjustment – quoted by work required; varies by fault.
Latch or handle repair – quoted after assessment; varies by component.
Cylinder fault – repair or replacement quoted; varies by condition.
Multipoint mechanism repair – quoted by parts and labour; depends on mechanism.

We explain how the charge is worked out before any work starts. See the lock repair page for the full pricing guide.

We confirm availability for your exact address when you call, rather than quoting a fixed arrival time.

Lock Repair questions

Is it cheaper to repair a lock than replace it?

Often, when the cause is alignment or a single worn part. If the mechanism is badly worn or parts are unavailable, replacement can be better value over time. We explain the options first.

Why is my uPVC door handle hard to lift?

Usually because the multipoint locking points are not lining up with the keeps, often because the door has dropped. Forcing it risks breaking the gearbox, so it is worth having the alignment checked.

Can you repair older locks in East Moulsecoomb?

Many older mortice locks and night latches can be serviced or repaired if parts are available. Where they cannot, we discuss compatible replacements that suit the existing door.

Door Lock Repairs in East Moulsecoomb